How To Use The Single Dip Fluid Bed
 Use
only clean dry air.- Keep air pump away from powder dust so the filter on air pump doesn't become clogged and restrict air flow.
- Regulate air to bring powder to a slight boil. (Too much air flow will result in excessive dust.)
- Dip preheated part into fluidized powder and remove at once.
- If powder smokes, the part is to hot.
- Powder should finish melting within several seconds after the part is removed from powder.
- To change powder color, empty excess power into a container for future use.
- Vacuum out cup and add new color.
|
Techniques & Instructions
|
